Canon super g3 printer cover error message

#Canon super g3 printer cover error message install#

In such cases, disconnect and reconnect the USB cable. Printing is disabled once the ink absorber becomes completely fullДЄ communication time out occurs if an operation takes too long or if it takes too much time to send data. Press the OK button to cancel the error so you can continue printing. This error message indicates that the ink absorber is nearly full. The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example. The resulting print quality is not satisfactory, if printing is continued under the ink out condition. Replace the empty ink cartridge immediately after the printing. The function for detecting the remaining ink level will be disabled. Then printing can continue under the ink out condition. If printing is in progress and you want to continue printing, press the Stop/Reset button for at least 5 seconds with the ink cartridge installed. Replace the ink cartridge and close the Scanning Unit (Printer Cover). Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

If you want to continue printing without this function, press the Stop/Reset button for at least 5 seconds.Д¬anon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected.

#Canon super g3 printer cover error message install#

Open the Scanning Unit (Printer Cover) and install the FINE Cartridge properly. The FINE Cartridge may not be installed properly. The FINE Cartridge may not be compatible with this machine. Make sure that each FINE Cartridge is installed in the correct position. If the error is not resolved, the FINE Cartridge may be damaged. Open the Scanning Unit (Printer Cover) and install the appropriate FINE Cartridge. The FINE Cartridge may not be installed properly or the cartridge may not be compatible with this machine.